| Specification | CM100 |
| Paper cup size of manufacture | 2oz ~ 16oz |
| Production speed | 120-150 pcs/min |
| Side sealing method | Hot air heating & ultrasonic |
| Bottom sealing method | Hot air heating |
| Rated power | 21KW |
| Air consumption (at 6kg/cm2) | 0.4 m³/min |
| Overall Dimension | L2,820mm x W1,300mm x H1,850mm |
| Machine net weight | 4,200 kg |
★ Top Diameter: 45 - 105mm
★ Bottom Diameter: 35 - 78mm
★ Total Height: maximum 137mm
★ Other sizes upon request
Single PE / PLA, Double PE / PLA, PE / Aluminum or water based biodegradable materials coated paper board
❋ The feed table is a double deck design to prevent paper dust go into the main frame.
❋ The mechanical transmission is mainly by gears to two longitudinal shafts. The main motor’s output is from both sides of motor shaft, therefore the force transmission is balance.
❋ The open type indexing gear (turret 10 : turret 8 arrangement to make all function more reasonable). We choose IKO (CF20) heavy load pin roller bearing for indexing gear cam follower, oil and air pressure gauges, digital transmitters are use (Japan Panasonic).
❋ Folding wings、knurling wheel and brim rolling stations are adjustable above main table, no adjustment needed inside the main frame so that the work is much easier and time saving.
❋ Electric control cabinet: The whole machine is controlled by PLC, we choose Japan Mitsubishi high-end product. All motors are independent controlled by frequency invertors, these can adapt wide range of paper character.
❋ Heaters is using Leister, which is well-known brand made in Swiss, ultrasonic for side seam supplemental.
❋ Paper low level or paper missing and paper-jam etc., all these faults will display precisely in touch panel alarm window
We also offer you the possibility to work together with us on the development of new products; from brainstorming to drawings and from sample production through to realization. Contact us!